Sun Microsystems STOREDGE A5000, Инструкция по установке и обслуживанию

Страница: 82 / 146

7-6 Sun StorEdge A5000 Installation and Service Manual • September 1999
6. Hit the Return key to complete the
luxadm remove_device
command.
For example:
7. For a disk array that is accessed by multiple hosts, repeat Step 3 and Step 6 to
remove the device entries for the removed disk.
8. Use the
luxadm insert_device
command to install the replacement disk drive.
For example:
Note –
Do not hit Return until Step 9 and Step 10 has been completed.
9. Install the new disk drive.
Slide the disk drive into the slot with the handle released. Once you have inserted
the disk drive as far as it will go into the slot, push down on the handle to secure it.
Note –
For arrays under volume manager or other RAID manager control, the new
disk must be at least the same formatted capacity as the disk it is replacing.
Hit <Return> after removing the device(s).
Drive in Box Name "array1" front slot 0
Removing Logical Nodes:
Removing c2t32d0s0
Removing c2t32d0s1
Removing c2t32d0s2
Removing c2t32d0s3
Removing c2t32d0s4
Removing c2t32d0s5
Removing c2t32d0s6
Removing c2t32d0s7
# luxadm insert_device box2,r0
The list of devices which will be inserted is:
1: Box Name "box2" rear slot 0
Please enter 'q' to Quit or <Return> to Continue:
Hit <Return> after inserting the device(s).