Sun Microsystems SPARC Series, Руководство по обслуживанию

Страница: 51 / 192

Chapter 3 Troubleshooting 3-13
3.5.3 Using the
showstatus
Command
The
showstatus
command displays information about faulty or degraded units
that are among the FRUs composing the server and information on the units on the
layers immediately above the layers of the faulty or degraded units. For each of the
displayed units, an asterisk (*) indicating that the unit is faulty is displayed with any
of the following status indicators, which is displayed after "Status:".
■
Normal: Normal state
■
Faulted: The unit is faulty and is not operating.
■
Degraded: The unit is operating. The unit is partly faulty or degraded and some
error has been detected. Although a faulty state is displayed for the unit, it is
operating normally.
■
Deconfigured: There is no problem with the unit itself, but it is degraded due to a
configuration problem, environmental problem, or the degradation of another
unit.
■
Maintenance: Maintenance is being performed.
replacefru
(8) or
addfru
(8) is
being executed.
XSCF> showlogs error
Date: Jun 17 11:05:32 JST 2008 Code: 80000000-c3ff0000-0173000600000000
Status: Alarm Occurred: Jun 17 11:05:32.522 JST 2008
FRU: /PSU#1
Msg: PSU shortage
Date: Jun 17 13:41:46 JST 2008 Code: 80002080-7801c201-0130000000000000
Status: Alarm Occurred: Jun 17 13:41:44.861 JST 2008
FRU: /MBU_A,*
Msg: Board control error (MBC link error)
Date: Jun 17 13:46:31 JST 2008 Code: 60000000-cd01c701-0164010100000000
Status: Warning Occurred: Jun 17 13:46:31.158 JST 2008
FRU: /OPNL,/FANBP_B
Msg: TWI access error
XSCF>
XSCF> showstatus
FANBP_B Status:Normal;
* FAN_A#0 Status:Faulted;
XSCF>