Sun Microsystems SPARC Series, Руководство по обслуживанию, Страница: 45 / 192

Chapter 3 Troubleshooting 3-7
3.3.2.2 Checking the Firmware Configuration
User authority is required to check the firmware configuration. The procedure below
can be used to check the configuration from the maintenance terminal.
1. Log in to XSCF shell.
2. Type
version
.
The
version
command displays firmware version information on the screen. For
details, see the SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers XSCF
User's Guide .
3.3.2.3 Downloading Error Log Information
To download error log information, use the XSCF log fetch function. The XSCF unit
has an interface with external units so that the service engineer can easily obtain
useful maintenance information such as error logs.
Connect the maintenance terminal, and use the XSCF shell or XSCF Web to
download error log information to the maintenance terminal.
3.4 Error Conditions
To interpret error information of the Solaris OS and obtain information on fault
management architecture (FMA) messages, access the following web site:
http://www.sun.com/msg
In addition, see the SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers
XSCF User's Guide to obtain more information on faults.
This web site can be used in the event of a Solaris OS error or domain error or to
look up specific FMA error messages that do not provide details on XSCF errors.
This web site provides the message ID displayed by software, technical information
on the error, and corrective action for the error. Information on errors and
documentation are updated regularly.
XSCF> version