Sun Secure Application Switch – Release Notes for v3.2.1
5
SNAT Active Standby Behavior in Redundant
Configuration
In redundant configuration applications, the back-up switch now implements SNAT
in standby mode so all SNAT traffic received at the back-up switch will be redirected
to the master switch. The SNAT IP addresses must be the same between both
switches.
Outgoing DNAT IP Address Is the Same as
Virtual Service IP Address
A DNAT entry can have the same IP address as a virtual service.
Auto Dump
When an error occurs on a function card, the relevant log files are automatically
created and generated.
Supported Hardware
The Sun Secure Application Switch consists of two hardware platforms.
■
Sun N1000 Series includes the N1216 and the N1400 models.
■
The N1216 provides two pluggable Gigabit Ethernet (copper or fiber) ports,
sixteen 10/100-Mbps ports, and a full complement of system and port status
LEDs.
■
The N1400 provides 4 Gigabit Ethernet (copper or fiber) ports and a full
complement of system and port status LEDs. The N1400 is rackmountable and
operates on standard AC voltages (115 or 230 VAC) using a single power
supply.
■
Sun N2000 Series includes the N2120 and N2040 models.
■
The Sun N2120 provides 12 small form-factor pluggable (SFP) Gigabit Ethernet
(copper or fiber) ports.
■
The Sun N2040 provides 40 10/100-Mbps ports and 4 SFP Gigabit Ethernet
(copper or fiber) ports.
