Sun Microsystems Netra, Руководство пользователя

Страница: 93 / 180

ISDN Administration 11-5
11
▼
To Modify or Delete Remote Host Connections
1. Select Network Connection Administration: ISDN Administration.
The ISDN Administration page is displayed.
2. Select one of the following:
•
To modify an existing interface, select Modify, and make the changes in the
form using Table 11-1.
•
To delete the existing interface, select Delete; then confirm the operation.
Local Port Assignments
Note – Profile B and SPID numbers should only be used in the U.S.A.
▼
To Configure a Port
1. Select Network Connection Administration: ISDN Administration ➤
Configure Port x.
2. Enter the information in the form using Table 11-2.
Table 11-2 Information for Configuring a Port (ISDN)
Switch Type Specifies the type of switch to which your ISDN line is
connected. This information is available from your phone
company or ISP. Choices: au1 (Australia); vn3, vn6 (France);
1tr6 (Germany); ntt (Japan); bt2 (United Kingdom); dms, 5ess,
ni2 (North America); etsi (Europe); swd-etsi (Sweden);
hkt (Hong Kong)
Profile A
Force 56Kb Forces the ISDN line to a 56Kb transfer rate, regardless of
how the incoming call identifies itself. This is mainly used to
solve incompatibility problems between switches.
Choices: On, Off
Calling Line Identify Enables or disables exchange service (if available) where the
exchange verifies that the local calling number is the phone
number of the calling system.