Sun Microsystems Netra, Руководство пользователя

Страница: 48 / 180

4-6 Netra Internet Server 3.1 User’s Manual—September 1996
4
Using a PC for Initial Configuration
Using a PC on the LAN for the initial configuration requires the following
general tasks:
•
Creating a partial configuration diskette using the Utilities diskette that was
shipped with your Netra system.
•
Connecting the Netra server to the LAN, insert the partial configuration
diskette, and power on the Netra server.
•
Using a client on the LAN to complete the initial configuration.
These processes are described in detail in the following sections.
▼
To Prepare for Configuration
1. If you have a Novell network, install the IPX Gateway software on each
PC on the LAN (see Chapter 2, “Client System Requirements”).
2. Obtain the following configuration information for your site:
•
System Defaults (see Chapter 19, “Netra System Administration.”)
•
Host name for your Netra server (See Chapter 19, “Netra System
Administration.”)
•
Type of network interface card, Ethernet port, and network protocol
•
LAN interface information: host address and netmask for a TCP/IP
network, or network number and frame type for an SPX/IPX network
(See Chapter 12, “Local Area Network Administration.”)
•
System administrator alias members (See Chapter 19, “Netra System
Administration.”)
•
Root password (See Chapter 18, “Root Password Administration.”)
•
Administration Web Server password (See Chapter 15, “Administration Web
Server.”)