6
7
8
7
9
9
Caution
– Do not block or cover the openings of your Sun product. Never place a Sun
product near a radiator or heat register. Failure to follow these guidelines can cause
overheating and affect the reliability of your Sun product.
Caution
– The workplace-dependent noise level defined in DIN 45 635 Part 1000 must be
70Db(A) or less.
Caution
– If installed in a closed or multi-unit rack assembly, the operating ambient
temperature of the rack environment may exceed the room ambient. Ensure that rack
environment ambient temperature does not exceed 55 degrees Celsius (130 degrees
Fahrenheit).
Caution
– Mounting of the equipment in a rack or cabinet should be such that a hazardous
condition is not created due to uneven mechanical loading or weight distribution.
Caution
– Ensure that the connection of multiple system units to the circuit does not
overload the the supply overcurrent protection or supply wiring. Consider the Sun product
nameplate electrical ratings when determining the correct branch circuit rating for your
installation.
6 Slide the unit into the rack. 7 Fasten the screws on the left side of the unit.
8
Adjust the bracket on the right side of the unit.
9
Fasten the screws on the right
side of the unit. It may be necessary to readjust the brackets fixings in order to
align the system as required.
!
!
!
!
!
806-1551-10.doc Page 4 Friday, July 9, 1999 4:23 PM
