Sun Microsystems Netra 440, Руководство по обслуживанию

Страница: 97 / 166

Chapter 4 Removing and Replacing Cold-Swappable Components 79
5. Loosen the two Phillips No. 2 captive screws securing the CPU/memory module to
the CPU cage (
FIGURE 4-20
).
FIGURE 4-20
Removing a CPU/Memory Module
6. Rotate the CPU/memory module ejector levers upward so that the CPU/memory
module connectors disengage from the CPU cage (
FIGURE 4-20
).
7. Pull the CPU/memory module from the chassis by the levers and place it on an
antistatic mat.
Support the CPU/memory module from underneath as you transfer it to the
antistatic mat.
Caution – The CPU/memory module can be hot. Handle the CPU/memory
module carefully to avoid injury.
Captive screws
Ejector levers