Sun Microsystems Netra 240, Руководство по обслуживанию

Страница: 33 / 154

15
C H A P T E R
2
Preparing to Service the System
This chapter contains the following sections:
■
“Tip Warning” on page 15
■
“Controlling Server Power” on page 16
■
“Initiating a Reconfiguration Boot” on page 24
■
“Accessing Internal Components” on page 27
■
“Accessing Rotating Service Module Components” on page 30
■
“Avoiding Electrostatic Discharge” on page 32
Note – Illustrations might contain optional components that are not available on all
standard configurations of the Netra 240 server.
Tip Warning
Caution – When the Netra 240 server is removed from the rack and placed on a
table for servicing, do not pull the server too far out with the rotating service
module open, or the server could tip over. When the rotating service module is
open, do not remove both the power supply units and the system board from the
server or the server will tip over.