Sun Microsystems GCS, Инструкция по установке и эксплуатации

Страница: 73 / 126

Chapter 4 Configuring Driver Parameters 51
Note – Configuring the parameters by putting
ndd
commands in
rcX.d
scripts is
not supported.
The man pages for
prtconf
(1M) and
driver.conf
(4) include additional details.
The next procedure shows an example of setting parameters in a
ce.conf
file.
●
To access any man page, type the
man
command plus the name of the man page.
For example, to access man pages for
prtconf(1M)
, type:
▼
To Set Driver Parameters Using a
ce.conf
File
1. Obtain the hardware path names for the
ce
devices in the device tree.
a. Check the
/etc/driver_aliases
file to identify the name associated with a
particular device:
Note –
ce "pci100b, 35"
is used by the Sun GigaSwift Ethernet MMF/UTP
adapter.
b. Locate the path names and the associated instance numbers in the
/etc/path_to_inst
file.
■
In this example:
■
The first part within the double quotes specifies the hardware node name in
the device tree.
■
The number not enclosed in quotes is the instance number (shown in bold
italics).
■
The last part in double quotes is the driver name.
■
In the hardware node name, the last component after the last
/
character and
before the
@
character is the device name.
% man prtconf
# grep ce /etc/driver_aliases
ce "pci108e,abba"
ce "pci100b,35"
# grep ce /etc/path_to_inst
"/pci@8,600000/network@1" 0 "ce"