Sun Microsystems Fire High-End Server Systems, Руководство по управлению кабелями

Страница: 15 / 16

Chapter 1 Cable Management 1-11
1.6 Uninstalling the Green Cable Straps
Green maintenance straps are for service only and should not be left in the system.
A location should be determined and the straps stored at the site. This section
describes the uninstallation procedures for:
■
Systems With Four Doors (Two in Front)
■
Systems With Two Doors (One in Front)
1.6.1 Systems With Four Doors (Two in Front)
1.6.1.1 For the Front of the System
1. Release the I/O cable bundles from the green maintenance strap and resecure
them to their former black cable hanger straps on the air plenum.
2. Remove the two screws that secure the green cable straps (No. 6) to the cabinet
door on the left and store the green straps for future use.
3. Remove the two screws that secure the green straps (No. 6) to the cabinet door on
the right and store the green straps for future use.
4. Secure the four screws in their original locations on the cabinet doors.
5. Close the cabinet doors.
1.6.1.2 For the Rear of the System
The buckle end of the green buckle strap (No. 2) that is used at the top crossbar of
the door measures approximately 17.0 in. (43.2 cm). The other end that used to hold
the cables measures approximately 12.0 in. (30.5
cm).
1. Release the I/O cable bundles from the green buckle straps (No. 2) and resecure
them to their former black cable hanger straps on the air plenum.
2. Release the buckle and remove the green buckle strap (No. 2) from the top
crossbar on the hinged side of the cabinet door on the left (
FIGURE 1-5
).
3. Release the buckle and remove the green buckle strap (No. 2) from the top
crossbar on the hinged side of the cabinet door on the right (
FIGURE 1-5
).
4. Close the cabinet doors.