Sun Microsystems E25544-02, Руководство пользователя

Страница: 74 / 90

64 Sun Dual Port 10GBase-T Adapter User’s Guide • July 2012
Note – In Linux systems, you can use any single digit as the VID.
4. Configure the
ixgbe
VLAN (
eth6
in this example).
where xxx.xxx.xx.xxx is the IP address of the interface.
Related Information
■
“VLAN Overview” on page 58
■
“VLAN Configuration” on page 61
▼
Configure VLANs (Windows)
1. Click Control Panel.
2. Click Network Connection.
3. Click the folder icon from the sub-manual bar.
4. Right-click the Sun Dual Port 10GBase-T Adapter port, then select Properties.
5. Click Configure.
6. Click VLAN, then click New.
7. Type
VLAN
with ID (for example, type
VLAN10
).
8. Click OK.
9. Open the Local Connections for VLAN window from the Network Connections
window (Control Panel->Network Internet->Network Connections).
10. Right-click the Properties button, and select the TCP/IPv4 port in the list.
11. Click the Properties button, and fill in the desired IP address.
12. Click Subnet Mask.
The value
255.255.255.0
is displayed.
# ifconfig eth6.5
xxx.xxx.xx.xxx
up