Inspection
We recommend an inspection of the Self Contained toilet prior to installation and to make sure you have
received all of the parts required as listed below.
- 4 -
Inspecting the unit for
damage
What’s in the Box
Familiarise
Yourself with the
Self Contained Toilet
Attaching
and
Detaching
the
footrest
(EXCEL units
i
)
If there is any visible damage to the carton-
The contents of the carton should be inspected before signing the bill of lading.
Damaged units should be refused. Call Sun-Mar immediately.
ii) If the shipper has left-
Report the damage immediately to the transport company and call Sun-Mar.
iii) Soon after delivery, remove the Self Contained Toilet carefully
from the carton- If there is hidden damage, or for any service Questions,
contact Sun-Mar to determine the best course of action.
1- Owners Manual
1- Warranty Card
1- Bowl Liner
1- 6” Diffusor (NE)
3- 4”x31” Vent Pipes (NE)
1- Excel/Compact Hardware Kit 1- Rake
1- Footrest (EXCEL & EXCEL NE) 1- 2” Pipe Insulation (Electric)
1- 1” x 8’4” Drain Hose (NE)
1- 4” Diffusor (Electric)
1- Compost Sure Green 4- 2”x31” Vent pipe (electric)
i) Turn the drum handle clockwise to rotate the patented Bio-Drum for mixing and
aeration. (The drum rotates counter-clockwise and the drum door closes). TThhiiss
iiss hhooww yyoouu wwiillll rroottaattee tthhee ddrruum
m dduurriinngg rreegguullaarr ooppeerraattiioonn..
ii) Pull the drum locker button, (located under the footrest) and turn the handle
counter-clockwise to simulate removal of compost. TThhiiss iiss hhooww yyoouu wwiillll rreem
moovvee
ccoom
mppoosstt dduurriinngg rreegguullaarr ooppeerraattiioonn..
iii) Plug the unit’s electrical cord (Electric) into a standard three-prong electrical
outlet, and feel the air movement from the vent outlet at the front of the unit to
ensure the vent system is working properly.
iv) Pull out the compost finishing drawers at the bottom right of the unit. After
the unit has been plugged in for ten minutes, place a hand on the floor of the
evaporating chamber (the area under
the finishing drawer) to check it is warm to the touch, and that the heater is working
properly.
The footrest attaches to the unit with the metal track above the
finishing drawer opening. To attach the footrest,
incline
the
footrest at a 45 degree angle to the floor as shown. Insert the
round top edge of the track on the footrest into the round top
edge of the metal track on the unit and then lower the footrest
to the floor. NNoottee:: FFoooottrreesstt m
muusstt bbee ccoorrrreeccttllyy aattttaacchheedd bbeeffoorree
sstteeppppiinngg oonn iitt..
