Sun Kingdom SK-3000A Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 65

Sun Kingdom SK-3000A Скачать руководство пользователя страница 53

52

CHAPTER 7

EQUIPMENT MAINTENANCE

7.1 Daily Maintenance

Warning: The AC power supply should be disconnected before wiping the

equipment.

Warning: The AC power supply should be disconnected every time the equipment

shuts down.

The use environment should be kept clean and dry, and the room should be well

ventilated. The surface of the instrument should be wiped gently with a clean dry towel to

avoid dust contamination. Ultrasound A, B and P probe belong to high precision

instruments. After use, they should be cleaned, disinfected and put back into the probe

rack.

Warning: Touch screen is easily damaged. Only use wet cloth to wipe. Solvents or

alcohol should not be used.

7.2 Maintenance in Process Of Working

When working , there should be no interference from strong noise , light , electricity and

magnetism. Keep this device from this kind of environment when working, or the

performance of device would be affected.

7.3 Maintenance of Probe

The probe is fragile and should be operated carefully. If it falls on a hard surface, it will be

damaged.

Regular inspection:

«
...
51
52
53
54
55
...
»

Содержание SK-3000A


































































Отзывы:

Нет отзывов