Page 8
Issue: 09.2002
9.0 Service Centre / spare part supply
S
TORAGE
/ M
AINTENANCE
/ S
ERVICE
7.0 Storage
➭
Remove the cable fixing Velcro bands.
➭
Remove the lighting set from the sunshade
(see chapter 6.4) and clean thoroughly.
➭
Allow all parts to dry and store.
The lighting set may not be left on the sunshade
during the winter months.
It must be stored in a dry and frost-free location.
Note
If possible you should use the original
lighting set packaging for storage.
Velcro band
positions
Sunshade frame
Sliding tube
8.0 Maintenance / repair
8.1 Maintenance
You should check the lighting set thoroughly for
damage once a year before the first use of the
season.
8.2 Repair information
Any repair work over and above replacing
lightbulbs may only be carried out by specialist
personnel.
If you have any questions regarding overhaul, or
wish to book our repair service or order spare
parts, please contact one of our Service Centres
by telephone (see chapter 10.0).
Caution:
Risk of accidents!
Several components in the lighting set are
live during operation.
• Always ensure that the lighting set is
disconnected from the power supply
during maintenance and repair work.
• Allow the lighting set to cool down before
replacing the lightbulb.
8.3 Replacing lightbulbs
➭
Disconnect the power supply.
➭
Remove the cover.
➭
Replace the lightbulb.
Only use E 27 lightbulbs of max. 40 W power!
➭
Screw on the cover.
➭
Reconnect the power supply.
Cover
1. Disconnect
the power
supply.
2. Replace the lightbulb.
Fitting
If you have any questions about setting up, require our repair service or wish to order spare parts,
please contact one of our Service Centres (see Service Centre / ordering spare parts information
sheet) or visit our Internet site at
www.sun-garden.de
.