43 |
P a g e
Changing this bolt position can allow the harrow to sit at three different angles of
scarification.
Height Adjustment:
The entire harrow assembly can be moved to a lower position by moving the pivot to
a lower hole. This can be particularly useful when the tines have worn down.
Break Back Protection:
The harrow has break -back protection at each of the different height positions. This
catches the harrow when reversing out of work.
Horizontal Tine Positions:
To adjust the harrows horizontal position, simply loosen the clamped joints and side
over. Once positioned re-tighten bolts firmly.
Due to the nature of Nylock nuts, it is advised to replace bolts after being fully
removed.
7.10
Straight Leading Disc
Specific to our subsoiler range, the straight leading discs
cut through the ground to facilitate a smoother turnover
of soil by the proceeding legs. Thanks to the bolted
mounting arrangement, the disc can be raised or lowered
easily to suit your requirements.
Adjustment:
Simple remove the bolts and raise/low disc arrangement
to suit your requirements. Re- position and tighten bolts.
Replaces bolts, washer, nuts if necessary.
Angle 1
Angle 2
Angle 3
Reverse Break-
back protection
Pivot
