21 |
P a g e
Steps:
•
Slowly back tractor up to machine.
•
Release pick up hitch in a low position, extend outwards if required.
•
Reverse carefully up to hitch and locate hitch onto machine towing eye.
•
Retract hitch if it has been extended.
•
Raise hitch until locking pin is secured.
•
Lower three-point linkage to release upward pressure on pick up hitch.
•
Turn tractor off, float hydraulic systems, then safely connect hydraulic &
electric connections.
•
Lift machine just enough to clear the ground of any parking
feature/working instruments.
•
Remove parking features/position them in the transport/working
positions.
•
Perform all necessary tests as outline within this manual.
•
Turn tractor back on.
3.3
Electronics Connection & Testing
Plug all electronic equipment in. Walk around the machine and ensure all lights are
functional. Visually inspect wiring looms for any exposed wires, breakages or damage.
If the system shows any sign of issue, see the troubleshooting section of this manual.
If you have any additional Sumo electronic equipment, see the Optional
Extras/Attachments section in this manual.
3.4
Hydraulics Testing
Check general hoses condition, abrasion, kinks etc. Visually inspect for leaks or
damaged connections. Do not touch with hands or get close enough to inhale any
vapours. Check cylinder condition and cleanliness. Run each system individually i.e.
wings up and down, drawbar up and down. If the system shows any sign of issue, see
the troubleshooting section of this manual.
3.5
Uncoupling Of Tractor
Never uncouple on an uneven or unstable surface. Ensure both the tractor and the
Sumo machines are on level, solid ground and put them in a secured configuration,
by use of handbrakes, chocks and any other movement prevention systems available.
Tractor must be fully immobilized with the key removed from the ignition. Obey all
other relevant safety practices outlined within this manual, including but not exclusive
to, the machine in general, hydraulics and electrics, and environmental awareness.
