5
9. The load is now fully supported by the Grasshopper
ready to be moved. Lift the handled end of the
Grasshopper and wheel load away.
Instructions For Detaching Pipe
1. At the front of the load, place a wood block on a
flat surface underneath where the load is to be
removed.
2. Lower the handles of the Grasshopper to the
ground so that the rear of the load is also resting on
the ground.
3. Disconnect the chain from the rear sliding chain
block hook and slide chain from underneath the
pipe.
4. Raise the handled end of the Grasshopper so that
the front of the pipe rests securely on the wood
block.
5. Disconnect the chain from the chain block hook in
the front and slide it out from underneath the load.
CautIOn
Be certain load rests securely on
wood block before removing chain.
If the load is not secure it may fall off
the wood block resulting in injury.
5. Hold the nose of the Grasshopper down by plac-
ing a foot on the lifting hook to keep the front of the
Grasshopper from raising prematurely.
