Summit SP7D2, Руководство пользователя

Страница: 9 / 20

8
Checking Drawer Alignment
The unit’s drawers are aligned at the factory before shipment. However, their alignment could have been
disturbed during shipment or during overlay panel installation. Check each drawer to confirm that it is
aligned:
• Side-to-Side — When viewed from the top, the drawer front should be square with the sides of the
cabinet.
• Front-to-Back — When viewed from the side, the drawer front should be aligned with the cabinet, not
cocked forward or back.
• Top-to-Bottom — When viewed from the front, the drawers should be level horizontally.
Adjusting Drawer Alignment
Warning – Shock Hazard !
The unit must be unplugged from the wall outlet
during drawer removal, adjustment and re-installation.
DRAWER REMOVAL
1. Confirm that the unit is unplugged from wall outlet.
2. Unplug the drawer ’s connection wiring (top drawer only).
3. Remove the mounting screws.
4. Pull the drawer completely out of the unit.
Caution: Use care when handling the drawers. Drawer edges, drawer rails and the unit’s slide
may be sharp.
Drawers