background image

CLEANING THE COMPRESSOR / FAN COMPARTMENT 

The compressor and fan are located behind the front louvers of the appliance. 

 

DISCONNECT THE UNIT’S POWER SUPPLY BEFORE 

REMOVING THE FRONT LOUVER to avoid accidents that 

may be caused by oscillation of the blade of the fan motor.

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Compressor 

Fan 

Door

Front louvers

Screws 

To clean the compartment behind the front louvers, 

1.  Disconnect the power supply to the appliance. 

2.  Remove the two screws, as shown above. 
3.  Lift the front louver panel, then pull it toward you, being careful not to disconnect any attached wiring. 
4.  Clean the area with a damp cloth, then dry it. 
5.  Replace the louver panel and screw it back into place. 
6.  Reconnect power to the appliance. 

 

DEFROSTING 

It is not necessary to defrost your refrigerator.  This is done automatically, using a forced-air system. 

There is a defrost water evaporation pan in the compartment below the main cabinet.  A hot gas line from 
the compressor passes through this pan and evaporates the water.  Check occasionally that the drain 
hose is always inside the evaporation pan. 
 

SECURITY LOCK 

Your unit is provided with a lock and key combination.  The lock may be found on the door frame, just 
below the door handle.  The keys are located inside the plastic bag that contains the 

Instruction Manual

After a key has been used, remove it and put it in a secure place for safekeeping. 

 
ENERGY SAVING TIPS 

 

DO NOT DISCONNECT UNIT AT NIGHT.  Reconnecting next day will increase energy consumption. 

 

DO NOT keep the door open any longer than necessary. 

 

DO NOT OVERLOAD UNIT.  Allow free air flow inside refrigerator. 

 

DO NOT PLACE HEAVY AND/OR LARGE OBJECTS INSIDE UNIT.  

 

It is important not to block air flow inside the refrigerator.  Remember that it is designed exclusively for 
cooling bottles and cans. 

  The appliance should be located in the coolest area of the room, away from heat-producing 

appliances and out of direct sunlight. 

 

Ensure that the unit is adequately ventilated. Never cover air vents. 

 

DO NOT PLACE FOODS IN REFRIGERATOR.  The forced air system will absorb their moisture.

 

 

11

Содержание SCR1505















Отзывы: