7
Improper use of the grounded plug can result in the risk of electrical shock. If the
power cord is damaged, have it replaced by a qualified electrician or an
authorized service center.
Never ground the unit through a gas, heating, or tap water pipe or the grounded
wire of a single-phase power supply.
Attaching the Casters
1. Slide the casters into the slots of the Machine bottom board.
2. Align the holes in the caster brackets with the holes in the Machine bottom board.
3. Fasten the screws in the diagonal holes for each caster (2 screws per caster).
Electrical Connection
This appliance should be properly grounded for your safety. The power cord of this
appliance is equipped with a three-prong plug that mates with standard three-prong wall
outlets to minimize the possibility of electrical shock.
Do not under any circumstances cut or remove the third (ground) prong from the power
cord supplied. For personal safety, this appliance must be properly grounded.
This appliance requires a standard 115/120 Volt AC ~ 60Hz three-prong grounded
electrical outlet. Have the wall outlet and circuit checked by a qualified electrician to
make sure the outlet is properly grounded. When a standard 2-prong wall outlet is
encountered, it is your responsibility and obligation to have it replaced with a properly
grounded 3-prong wall outlet.
To prevent accidental injury, the cord should be secured behind the appliance and not
left exposed or dangling.
Machine bottom board
Screw
Caster
Screw
Caster
