Summit CP36BK, Инструкция по эксплуатации

Страница: 4 / 16


This unit is not designed to operate in enclosed spaces. When placing
your unit, make sure you allow at least 4” of clearance on all sides.

Use two or more people to move and install the refrigerator. Failure to do so
can result in back or other injury. When moving the appliance, do not tilt it
beyond 45° from the upright position.

To ensure proper ventilation for your refrigerator, the front of the unit must be
completely unobstructed. Choose a well-ventilated area with temperatures
above 60°F (16°C) and below 90°F (32°C). This unit must be installed in an
area protected from the elements such as wind, rain, water spray or drips.

The refrigerator should not be located next to ovens, grills or other sources of
high heat.

The refrigerator must be installed with an electrical connection in accordance
with state and local codes. A standard electrical supply (115-120V AC only,
60 Hz), properly grounded in accordance with the National Electrical Code
and local codes and ordinances is required.

Do not kink or pinch the power supply cord of the refrigerator.

The fuse (or circuit breaker) size should be 15 amps.

It is important for the refrigerator to be leveled in order to work properly. You
may need to make several adjustments to level it.

Do not use solvent-based cleaning agents or abrasives on the interior. These
cleaners may damage or discolor the interior.

This appliance is not intended for use by young children or infirm persons
without supervision.

Do not use this apparatus for other than its intended purpose.
CAUTION: THIS APPLIANCE IS NOT DESIGNED FOR THE STORAGE OF
MEDICINE OR OTHER MEDICAL PRODUCTS.
SAVE THESE INSTRUCTIONS
3