5
CARE AND MAINTENANCE
Defrosting Your Refrigerator (Model CM406WBI/FC)
Defrost the refrigerator when the frost accumulated on the evaporator is about 5mm (1/5 inch) thick.
Set the thermostat dial to “OFF” position. Remove frozen or perishable foods. Defrosting usually
takes a few hours. After defrosting, return the thermostat dial to the desired position. To defrost
quickly remove all foods from the refrigerator and leave the door open. Never use a knife or other
metal instrument to scrape ice/frost from the liner.
Defrosting Your Refrigerator (Models FF29KBI/FC and FF471WBI/FC)
These appliances require no manual defrosting. During the operation of the compressor, ice will build
up along the cold rear wall (the evaporator plate is behind the wall). During the compressor’s off-
cycle, the ice will melt, drip down, and collect in a tray above the compressor, where the
compressor’s heat evaporates the water. If you notice excessive ice build-up on the rear wall, try
setting the temperature slightly higher (i.e., a lower setting of the thermostat). Also, be sure that the
door gasket is sealing well.
Cleaning Your Refrigerator
•
Turn temperature control to "OFF", unplug refrigerator and remove the food, shelves, and trays.
•
Wash the inside surfaces with a warm water and baking soda solution. The solution should
consist of about 2 tablespoons of baking soda to a quart of water.
•
Wash the shelves and trays with a mild detergent solution.
•
The outside of the refrigerator should be cleaned with mild detergent and warm water.
•
Wring excess water out of the sponge or cloth before cleaning the area of the controls, or any
electrical parts.
•
Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry
with a clean soft cloth.
Vacation Time
•
Short vacations:
Leave the refrigerator operating during vacations of less than three weeks.
•
Long vacations:
If the refrigerator will not be used for several months, remove all food and
unplug the power cord. Clean and dry the interior thoroughly. To prevent odor and mold growth,
leave the door open slightly, blocking it open if necessary.
Moving Your Refrigerator
•
Remove all the food.
•
Securely tape down all loose items inside your refrigerator.
•
Turn the leveling screw up to the base to avoid damage.
•
Tape the door shut.
•
Be sure the refrigerator stays secure in the upright position during transportation. Also protect
the outside of the refrigerator with a blanket or similar item.
Energy-Saving Tips
•
The refrigerator should be located in the coolest area of the room, away from heat producing
appliances, and out of the direct sunlight.
•
Let hot foods cool to room temperature before placing in the refrigerator. Overloading the
refrigerator forces the compressor to run longer.
•
Be sure to wrap foods properly, and wipe containers dry before placing them in the refrigerator.
This cuts down on frost build-up inside the refrigerator.
•
Refrigerator storage bin should not be lined with aluminum foil, wax paper, or paper toweling.
Liners interfere with cold air circulation, making the refrigerator less efficient.
•
Organize and label food to reduce door openings and extended searches. Remove as many
items as needed at one time, and close the door as soon as possible.
