Summit BIM68OSGDR, Руководство пользователя

Страница: 20 / 28

19
5. Clean the gap of the nozzle
frame fixed on the vessel
sheet (water tank).
6.
Lift the drain projectile inside
the vessel sheet (water
tank), clean it, and drain the
water.
•
Make sure the drain projectile
is assembled back in the
correct position after
cleaning; otherwise, draining
will not stop, with the product
rendered unable to make ice
cubes.
Cleaning the filters of the water tank and ice tank
1.
Empty the ice tank and prepare a
cleaning solution by mixing 1 oz
of neutral dishwashing detergent
with 2 gallons of warm water (95
to 113°F). Soak a clean cloth in
the solution and clean the inside
of the ice tank.
Pour an appropriate amount of
the solution into the draining
pipe, and then wait until it dries
naturally.
• Press the switch to set it to “WASH” when cleaning the product. This will
repeat the process of supplying water for about 2 minutes and operating the
circulation pump 3 times, enabling easier cleaning.
Cleaning the nozzle / ice slide / water tank:
-
Clean at least once a month after turning off power.