LEG BRACES (continued)
4.
The six Cross Braces will attach next. Start by positioning
one Cross Brace as shown in
figure 46.
This Brace will bolt
to the
OUTSIDE
of the two Brackets, as shown in
figure 47
and figure 48.
5.
Use one
1 1/2” bolt and lock nut
at each Bracket to
secure the Brace. Run these bolts from the inside out so
that the nut is on the outside of the tube.
CROSS
BRACE
(PN 82072.1400)
46
1 1/2” BOLT, LOCK NUT -
WRENCH TIGHTEN
47
48
6.
Position one Cross Brace
(in blue)
as shown in
figure
49.
This Brace will bolt to the
INSIDE
of the two Brackets,
as shown in
figure 50 and figure 51
and it will sit on the
INSIDE
of the Brace installed in
Steps 4 - 5
(shown in green)
7.
Use one
1 1/2” bolt and lock nut
at each Bracket to
secure the Brace. Run these bolts from the inside out so
that the nut is on the outside of the Bracket.
1 1/2” BOLT, LOCK NUT -
WRENCH TIGHTEN
50
51
CROSS
BRACE
(PN 82072.1400)
49
PG 13
