PG 4
www.summitstands.com
CABLES
1.
Position one of the Hanging Tabs as shown in
figure 5
. The bent end of the tab should wrap around
the Upright tube and the open end should face the
tree.
2.
Line up one end of the cable with the same hole.
The flat portion of the cable eyelet should sit flush
against the Hanging Tab as shown in
figure 6
. Secure
using one
2” bolt and lock nut
.
3.
Attach the lower end of the cable to the Platform
as shown in
figure 7
using one
1 1/2” bolt and lock
nut
. The flat portion of the cable eyelet should sit
flush against the platform tubing as shown in
figure 8
.
4.
Repeat
Steps 1 - 3
for the other Cable / Hanging
Tab.
HANGING
TAB
CABLE
SEAT UPRIGHT
ASSEMBLY
2” BOLT, LOCK NUT -
WRENCH TIGHTEN
5
6
1 1/2” BOLT, LOCK NUT -
WRENCH TIGHTEN
7
8
SEAT
1.
Slide the sewn pouch
on the Seat over the Seat
Pan as shown in
figure 9
.
2.
Secure the seat using
the hook and loop strips
shown in
figure 10
.
9
10
NOTICE
The foam seat included with these treestands is
removable for storage.
DO NOT
leave your stand
outdoors when it is not being used.
