2
2 3/4” BOLTS, LOCK NUTS -
WRENCH TIGHTEN
PG 3
4
ASSEMBLY
STANDOFF TABS
1/4” WASHER
SEAT PAN
SEAT
UPRIGHT
BAR
1
SEAT UPRIGHT
1.
Position two Standoff Tabs on the inside of the Seat
Upright Bar as shown in
figure 1
. Use two of the
1/4”
Washers
on the outside of the Seat Upright tubing.
2.
Slide the Seat Pan up and line up the holes. The
expanded metal side of the Seat Pan should face up as
shown in
figure 2
. Use two,
2 3/4” bolts and lock nuts
to secure the Seat Pan, Washers, Upright and Standoff
Tabs as shown.
3.
Position the platform below the completed Seat
Upright Assembly. The expanded metal side of the
Platform should face up. Use two
1/4” washers
between the Upright Bar and the two welded tabs on
the platform as shown in
figure 3
.
4.
Slide the Seat Upright down between the tabs and
secure using two
2” bolts and lock nuts
(
as shown in
figure 4
.)
3
PLATFORM
(82070 shown, others similar)
1/4” WASHER
1/4”
WASHER
SEAT UPRIGHT
ASSEMBLY
4
2” BOLTS, LOCK NUTS -
WRENCH TIGHTEN
