PG 5
PLATFORM / SEAT BASE
1.
Position the Top Ladder Section, Left Upright
Arm and Right Upright Arm as shown in
figure 1.
The Top Ladder Section has two couplers welded
on and does not have a U bracket.
2.
Slide the Uprights down onto the Ladder
Section and line up the bolt holes.
3.
Position the platform as shown in
figure 2.
The expanded metal side faces up. Align the
Platform with the bolt holes from
Step 2
.
4.
Secure the Platform to the Ladder Column
using two
2 3/4” bolts and lock nuts
as shown in
figure 3.
Leave these bolts hand tight for now.
5.
Position the Seat Base as shown in
figure 4.
The expanded metal should face up. Slide the
Seat Base down onto the Upright Arms and line
up the holes.
6.
Position one of the Armrest Upright bars as
shown in
figure 5.
1
TOP LADDER SECTION
(PN 82064.910)
LEFT
UPRIGHT
ARM
(PN 82064.250)
RIGHT
UPRIGHT ARM
(PN 82064.200)
PLATFORM
(PN 82064.100)
2
2 3/4” BOLTS, LOCK NUTS -
WRENCH TIGHTEN STEP 9
3
4
SEAT BASE
(PN 82064.300)
ARMREST
UPRIGHT
(PN 82064.010)
5
ASSEMBLY
5
