PG 8
www.summitstands.com
FOAM SEAT / PADS
1.
Position the Foam Seat inside the frame as shown in
figure 28
.
2.
Wrap the Velcro straps around the Seat Support to
attach.
3.
Wrap the three included pads around the frame in
the green areas as shown in
figure 28
. Pads can be
repositioned to fit you needs.
NOTICE
The foam seat included with this treestand is
removable for storage.
DO NOT
leave your stand
outdoors when it is not being used.
28
FOAM SEAT
(PN 82074.17)
24
U BRACKET
STABILIZER
FEMALE SECTION
(PN 82074.15)
25
1 3/4” BOLT, LOCK NUT -
WRENCH TIGHTEN
STABILIZER
FEMALE SECTION
STABILIZER
MALE SECTION
(PN 82074.14)
26
1/4” WIRE LOCK PIN
27
STABILIZER BAR
1.
Position the Female Section of the Stabilizer bar as
shown in
figure 24.
The Stabilizer bar will attach to the
welded U Bracket. Slide the bar into the bracket and
line up the hole.
2.
Secure using one
1 3/4” bolt and lock nut
.
(see figure 25)
Do not overtighten.
3.
Position the Male Stabilizer bar as shown
(figure 26).
Line up the bolt holes and secure using the
Wire Lock
pin
as shown in
figure 27.
The Stabilizer bar has several
holes to accommodate different tree sizes.
Hardware Needed
1/4X20 - 1 3/4” Bolt
- 1
1/4X20 - Lock Nut
- 1
Wire Lock Pin
-1
