(Routine Preventative Maintenance, continued)
Inspect all screws, bolts, and other fasteners, particularly those
associated with guards, switches, and other safety devices.
Tighten or replace as necessary.
Inspect and lubricate door hinges, ratchets, and latch
mechanisms. When lubricating ratchet mechanisms, loosen them
so that as much thread area is exposed as when they are fully
opened in use, and apply grease to the exposed threads.
Lubricate any grease zerk fittings provided.
ELECTRICAL
ELECTRICAL
ELECTRICAL
ELECTRICAL
Vibration can loosen connections over time. Check to be sure that
all panels and control boxes are properly covered and latched.
After disabling the compactor as explained on page
After disabling the compactor as explained on page
After disabling the compactor as explained on page
After disabling the compactor as explained on page 2
2
2
2.6
.6
.6
.6, look
inside of boxes and inspect starters, controllers, relays, terminal
strips, and other mounted components, checking for loose
connections or exposed wires that could create problems.
Make sure that all covers on limit switches, pressure switches,
and solenoid valves are secure.
Inspect for frayed conduit or insulation, or exposed wires.
Inspect all limit switches to ensure they are mounted securely
and aligned for proper operation.
3.4
PO Box 1847, Post Falls, ID 83877-1847 • T (208) 773-3885 • F 773-3799 • E <[email protected]>
