Summit Appliance LDHP24, Руководство пользователя

Страница: 8 / 28

8
Attaching the Drain Hose
This dryer needs to be connected to a drain to dispel the water collected during the drying cycle.
A drain hose is supplied with the appliance, and simply needs to be attached to an outer drain
before use. To attach the drain hose:
1. Remove the drain hose
from the holder on the
back wall of the dryer,
located on the left hand
side, below the top cover.
2. Attach the hose into a
drain
no more than 31”
(80cm) from the floor.
Connecting the Appliance to the Power Supply
•
Before connecting the dryer to the power supply, wait for a least two hours for the appliance
to reach room temperature.
•
Connect the dryer to a grounded power outlet, which should be freely accessible after
installation.
•
DO NOT connect the dryer using an extension cord.
•
A damaged power cord may only be replaced by an authorized repair person.
NOTE: Use over-voltage protection to protect the appliance in case of a lightning strike.