background image

 

IMPORTANT SAFEGUARDS 

 

Your safety and the safety of others are very important. 

 

Before the  refrigerator  is used, it must be properly positioned and 
installed as described in this manual, so read the manual carefully. To 
reduce the risk of fire, electrical shock or injury when using the 
appliance, follow basic precautions, including the following: 

 
 
 
 
 

  Plug into a grounded 3-prong outlet. Do not remove grounding prong, do not use an 

adapter, and do not use an extension cord. 

  It is recommended that a separate circuit, serving only your refrigerator, be provided. Use 

receptacles that cannot be turned off by a switch or pull chain. 

  Never clean appliance parts with flammable fluids. These fumes can create a fire hazard 

or explosion. And do not store or use gasoline or other flammable vapors and liquids in the 
vicinity of this or any other appliance. The fumes can create a fire hazard or explosion. 

  Before proceeding with cleaning and maintenance operations, make sure the power line of 

the unit is disconnected. 

  Do not connect or disconnect the electric plug when your hands are wet. 

  Unplug the appliance or disconnect the power before cleaning or servicing. Failure to do 

so can result in electrical shock or death. 

  Do not attempt to repair or replace any part of your refrigerator unless it is specifically 

recommended in this material. All other servicing should be referred to a qualified 
technician. 

 
 
 
 
 

  Use two or more people to move and install the refrigerator. Failure to do so can result in 

back or other injury. 

  To ensure proper ventilation for your appliance, the front of the unit must be completely 

unobstructed. Choose a well-ventilated area with temperatures above 60

°

F (16

°

C) and 

below 90

°

F (32

°

C). This unit must be installed in an area protected from the elements, 

such as wind, rain, water spray or drips. 

  The appliance should not be located next to ovens, radiators or other sources of high heat. 

  The appliance must be installed with all electrical connections in accordance with state 

and local codes. A standard electrical supply (115V AC only, 60 Hz), properly grounded in 
accordance with the National Electrical Code and local codes and ordinances, is required. 

  Do not kink or pinch the power supply cord of the appliance. 

  The fuse (or circuit breaker) size should be 15 amperes. 

  It is important for the refrigerator to be leveled in order to work properly. You may need to 

make several adjustments to level it. 

  Never allow children to operate, play with or crawl inside the refrigerator. 

  Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners 

may damage or discolor the interior. 

  Do not use this apparatus for other than its intended purpose.

 

 

 

Содержание FF61BI













Отзывы: