14
Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8AM to 5PM MST, Monday-Friday.
Extended operating days and hours during peak season requirements.
4. Turn the Pump upside down. Locate the latch pin on the underside
of the Pump Base , push the pin down and then left to unlock.
5. Twist counterclockwise to remove the Base.
19
17
15
19
17
15
17
19
15
18
19
1. Unplug the Pump from the power outlet.
2. For the Suction Fitting : seal it with the SF Cap .
For the Return Fitting : remove the RF Diverter , and seal it with the Service Plug .
3. Vent the Pump by slowly loosening the Vent Screw . Then twist counterclockwise to remove the Seal Top .
4. Take out the Filter Cartridge and any chlorine tablets left inside.
5. Loosen all four Hose Clamps , detach both the Hoses , and drain any remaining water.
6. Clean and dry all parts, including the Cartridge.
7. Liberally lubricate the Vent Screw O-Ring and Canister Gaskets with petroleum jelly. Then reassemble them with the Vent Screw, Seal Top and Canister.
8. Put all the parts into an airtight plastic bag, and store in a dry place that remains above 32°F (0°C) at all times.
5
2
6
7
12
9
20
10
13
16
14
8
PUMP DISASSEMBLY & STORAGE
15
6. Take out the Motor Assembly . Be careful not to lose the Rubber
Nozzle .
18
19
The most efficient way to troubleshoot or replace the Pump is to remove the entire Pump Motor Assembly . The Motor is consisted of a Rotor Assembly and its related parts. If the
Rotor and/or its parts is/are broken, or the Rotor, even in perfect condition, is not seated in place between the Volute Cover and Pump Body , the Pump will not function properly.
23
19
21
22
1. Unplug the Pump from the power outlet.
For the Suction Fitting : seal it with the SF Cap .
For the Return Fitting : remove the RF Diverter , and seal it with the Service Plug .
2. Vent the Pump by slowly loosening the Vent Screw . Then twist counterclockwise to remove the Seal Top .
3. Loosen the two Hose Clamps attaching to the Pump inlet and outlet, detach the Hose connections and remove the Pump.
STEP 1: Removal of the Motor Assembly
5
2
6
7
12
10
14
8
PUMP SERVICING INSTRUCTIONS
