background image

 

App.1-1 

Warranty 

 

 

Warranty 

Warranty 

period 

The warranty shall be 18 months from date of shipment or 12 months after initial 

operation, whichever is shorter. 

Warranty 

condition 

In the event that any problem or damage to the Product arises during the “Warranty 

Period” from defects in the Product whenever the Product is properly installed and 

combined with the Buyer’s equipment or machines maintained as specified in the 

maintenance manual, and properly operated under the conditions described in the 

catalog or as otherwise agreed upon in writing between the Seller and Buyer or its 

customers; the Seller will provide, at its sole discretion, appropriate repair or replacement 

of the Product without charge at a designated facility, except as stipulated in the 

“Warranty Exclusions” as described below. 

However, if the Product is installed or integrated into the Buyer’s equipment or machines, 

the Seller shall not reimburse the cost of: removal or re-installation of the Product or 

other incidental costs related thereto, any lost opportunity, any profit loss or other 

incidental or consequential losses or damages incurred by the Buyer or its customers. 

Warranty 

exclusion 

Not withstanding the above warranty, the warranty as set forth herein shall not apply to 

any problem or damage to the Product that is caused by: 

1.Installation, connection, combination or integration of the Product in or to the other 

equipment or machine that rendered by any person or entity other than the Seller. 

2.Insufficient maintenance or improper operation by the Buyer or its customers such that 

the Product is not maintained in accordance with the maintenance manual provided or 

designated by the Seller; 

3.Improper use or operation of the Product by the Buyer or its customers that is not 

informed to the Seller, including, without limitation, the Buyer’s or its customers’ 

operation of the Product not in conformity with the specifications; 

4.Any problem or damage on any equipment or machine to which the Product is 

installed, connected or combined or any specifications particular to the buyer or its 

customers; 

5.Any changes, modifications, improvements or alterations to the Product or those 

functions that are rendered on the Product by any person or entity other than the 

Seller; 

6.Any parts in the Product that are supplied or designated by the Buyer or its customers; 

7.Earthquake, fire, flood, salt air, gas, lightning, acts of God or any other reasons beyond 

the control of the Seller; 

8.Normal wear and tear, or deterioration of the Product’s parts, such as the cooling fan 

bearings; 

9.Any other troubles, problems or damage to the Product that are not attributable to the 

Seller. 

Others 

The Seller will not be responsibility for the installation and removal of the inverter. Any 

inverter transportation cost shall be born by both Seller and Buyer. 

 

Содержание HF-430NEO Series


























Отзывы: