PARAMAX SFC Operating Manual
e-mail: [email protected]
www.sumitomodriveeurope.com
Tel. +49 (0) 8136 66 0
Cyclostraße 92
85229 Markt Indersdorf
25
PX_SFC_DEU_ENG_11_09_991131
Do not disassemble PARAMAX SFC gear unit for cooling towers during operation. Even at a standstill,
with the exception of the oil inlet/outlet, no parts should be removed while the input and output shaft
of the PARAMAX SFC gear unit are coupled to a motor or other work machine. Otherwise malfunction,
uncontrolled operation, serious injury or damage to the machine may occur as a result of decoupling of
the gears.
The PARAMAX SFC gear unit for cooling towers should not be used for any purposes other than those
indicated on the rating plate or in the manufacturer’s specifications. Otherwise there is a risk of electric
shocks, injuries or damage to the machine.
2.1 Safety Instructions for Operation with Motor/Frequency Converter
If a drive motor is connected to the PARAMAX SFC gear unit, it should be put into operation only after
checking that the data on the gear unit model plate match the data in the documentation supplied
(drawings, parts lists, etc.).
- There should be no signs of damage on the gear.
- The lubricants provided must correspond to the ambient conditions, and must be prepared where
necessary.
If a motor is connected to the PARAMAX SFC gear unit, it should be used with the frequency converter
only if it conforms to the data on the model plate of the PARAMAX SFC gear unit. The PARAMAX SFC
gear unit is designed for industrial installations and must be used only in accordance with the data in
the technical documentation and on the model plate. It meets the current standards and regulations,
and the requirements of directive 94/9EC.
SIT S.A. | Tfno. 943 457200 | [email protected] | www.sitsa.es
SIU 8320-00
Instrucciones de instalación y mantenimiento Reductores PARAMAX SFC para Torres de Refrigeración
20/03/2018