Sumex 3505150, Оригинальное руководство

Страница: 3 / 8

-3-
BOOST reverse
correct
BOOST reverse
correct
BOOST reverse correct BOOST reverse correct
Jump start 12V vehicle Instruction
1. Connect the blue plug fully seated into the host, and make sure
the Cable Indicator is off.
2. Connect Red Clamp to the positive (+) battery terminal, Black
Clamp to the negative (-) battery terminal.
3. Operate following the instruction of the Cable Indicator:
4. Start the vehicle.
5. When the vehicle is started, remove the jumper cable from the
vehicle battery. Leave the vehicle’s engine running.
JUMP START & POWER STATION
BOOST reverse correct
GREEN LIGHT on: Telling
the connection circuit is
working, you can turn on
the engine to jump-start
directly.
RED LIGHT on with
buzzing: Telling the
connection is wrong, and
buzzing to alarm to correct
the clamps as step 2
mentioned above, wait until
the GREEN LIGHT is on to
turn on the engine.
GREEN LIGHT blinking
with buzzing: Saying
the vehicle battery is low,
press the “BOOST” button,
wait until GREEN LIGHT
becomes solid, then turn on
the engine within 30s.
No Lights on, No buzzing:
Saying the vehicle’s
battery may be damaged,
after confirm the clamps
connection is correct,
press the “BOOST” button,
wait until GREEN LIGHT
is on, and then turn on the
engine within 30s.
Charging Cell Phone or Tablet Instructions
1. Plug the switch cable to Quick Charge output port.
2. Select appropriate connector and connect it to your mobile phones or tablet.
3. Touch the switch button, it can recognise electronic products’ suitable parameters, start
to charge for mobile phone/tablet, etc
LED flash light
Press the switch 3 seconds to start the LED flash light, short press to turn off.
BOOST reverse correct
Original Manual