PNEUMATIG.EU - GDYNIA UL.WIELKOPOLSKA 158 -
)
58 622 49 22
PNEUMATIG.EU - GDYNIA UL.WIELKOPOLSKA 158 -
)
58 622 49 22
PNEUMATIG.EU - GDYNIA UL.WIELKOPOLSKA 158 -
)
58 622 49 22
PNEUMATIG.EU - GDYNIA UL.WIELKOPOLSKA 158 -
)
58 622 49 22
PNEUMATIG.EU - GDYNIA UL.WIELKOPOLSKA 158 -
)
58 622 49 22
PNEUMATIG.EU - GDYNIA UL.WIELKOPOLSKA 158 -
)
58 622 49 22
PNEUMATIG.EU - GDYNIA UL.WIELKOPOLSKA 158 -
)
58 622 49 22
Air hose
Blow compressed air through the supply hose before connecting the tool.
Lubrication
Before connecting the hose, apply 4 or 5 drops of #60 spindle oil at the air inlet. (No lubrication is
requires when oiler is used) Use of a thicker oil can lead to reduced performance or malfunction. If a
thicker oil is used by accident, wash it away immediately. Also, every 3 or 4 hours of operation, oiling is
necessary.
Idle running
Idle operation will shorten the life of the tool and needles and should be avoided.
Cautions for operation
The quick-reciprocating needles of Jet Chisel adjust automatically to a surface contour during cleaning.
Slight pressure of the needles against the work surface is sufficient for maximum performance. An upright
tool position is the best. The tool will efficiently clean uneven surfaces, get into grooves, corners and
gaps, clean outside and inside surfaces and clean spades inaccessible and too confined for other types of
tools.
We can supply
Ø
3 needles for this tool. Change needles according to your work. Change the kind of
needle guide according to your work.
The broken heads of needles must be removed from the cylinder, otherwise continuos operation with them
causes malfunction and shortened the life of needle supporter.
4 / 6
PNEUMATIG.EU - GDYNIA UL.WIELKOPOLSKA 158 -
)
58 622 49 22
PNEUMATIG
