PNEUMATIG.EU - GDYNIA UL.WIELKOPOLSKA 158 -
)
58 622 49 22
PNEUMATIG.EU - GDYNIA UL.WIELKOPOLSKA 158 -
)
58 622 49 22
PNEUMATIG.EU - GDYNIA UL.WIELKOPOLSKA 158 -
)
58 622 49 22
PNEUMATIG.EU - GDYNIA UL.WIELKOPOLSKA 158 -
)
58 622 49 22
PNEUMATIG.EU - GDYNIA UL.WIELKOPOLSKA 158 -
)
58 622 49 22
PNEUMATIG.EU - GDYNIA UL.WIELKOPOLSKA 158 -
)
58 622 49 22
PNEUMATIG.EU - GDYNIA UL.WIELKOPOLSKA 158 -
)
58 622 49 22
Foreword
Sumake is a manufacturer and exporter of air tools since established. We have devote all our effort in
improving quality and tools life. As well as the noise and vibration of tools. Bring all of your working efficiency,
profits and enjoy using the tool is our principle.
Operator's instruction
Main Applications
de-slagging, de-sputtering of welds;
shot-peening after welding;
cleaninh metal surfaces of rust and scale;
stripping paint;
cleaning castings;
removing cores;
cleaning brick and stone-work;
cleaning ship plates barges, buoys.
Cautions for Use
Air pressure
Maximum performance is displayed at a gauge pressure of 6 bar. Range-wise, this is an air pressure from
5 to 7 bar (70 to 100 psi)
Air line
Use a 3/8" air hose between the compressor and the tool. Compressed air is cooled and its water content
separated, as soon as the air leaves the compressor. A portion of the water content, however, is
condensed in the piping, and can enter the tool mechanism, and may cause trouble. So, install an air filter
and on oiler between the compressor and the tool. The compressor used should have 1 or higher HP in
the case of using each one unit.
3 / 6
PNEUMATIG.EU - GDYNIA UL.WIELKOPOLSKA 158 -
)
58 622 49 22
PNEUMATIG
