Sullivan-Palatek D260UJD4PTOW, Руководство пользователя

Страница: 46 / 136

38 MAINTENANCE
5.1 MAINTENANCE SCHEDULE
COMPRESSOR MAINTENANCE SCHEDULE
PROCEDURE
FREQUENCY (HOURS)
SEE NOTE REF�
D
A
ILY
50 25
0
1000 2000 A
S R
EQ
U
IR
ED
Check oil level (before starting) x 1 5.3
Check radiator coolant level x 1
Check fuel supply (after starting) x 1
Check air filter elements x 1,7 5.10
Check for fuel, oil air and water leaks x 1
Drain water from compressor sump x 2
Drain water and sediment from fuel tank x 2,7
Change oil filter element x x 6 5.7
Change compressor oil x x 5 5.3, 5.4
Check drawbar and bolt torque x 3 5.2
Check wheel lug nuts x 3
Check tire pressure x 3
Inspect lifting frame (before each lift) x 3
Change compressor air filter element x 4,7 5.10
Check axle spring shackles and mounting bolts x 4
Clean battery terminals x 4
Check battery hold-downs and cables for wear x 4
Check compressor shaft seal for leaking x 4 5.15
Check air filter piping, fittings and clamps x 4
Check radiator hoses and clamps x 4
Check engine and compressor supports x 4
Replace air/oil separator element x 5 5.12
Check all door gaskets, hinges and latches x 5
Drain engine radiator coolant and replace x 5
Clean and flush cooling system x 5 5.14
Check protective circuits and verify proper function x 5
Check sump pressure relief valve x 5
Inspect and clean oil system thermostat x 6
Check control adjustment x 6 5.16
Re-pack wheel bearings x 6
NOTES
1. Or every 10 hours of operation or on rent
return
2.
Or weekly
3. Or before returning to ready line
4. Or 6 months
5. Or annually
6. After first 50 hours of operation
7.
More frequently in extreme operating
conditions (dusty, humid, low temperature)
NOTE!
For engine maintenance, please refer to the Engine Manufacturer’s Maintenance Manual.