Sullivan-Palatek D110PKU, Руководство пользователя, Страница: 46 / 100

38 PARTS CATALOG
8.1 ORDERING PARTS
A list of recommended spare parts for this compressor is provided on the following page. These parts can
be kept on hand to minimize downtime for the most common maintenance issues. A complete parts listing is
included with exploded drawings for all the parts on the compressor.
Parts should be ordered from the nearest full-service distributor or factory-authorized compressor center.
Only call the factory if parts cannot be obtained locally. Before calling to order parts, please have the model
and serial number information available. This information can be found on the serial number plate located on
the compressor.
NOTE! Use the space provided on the inside cover of the manual to record the model and serial number of the
compressor for future reference.
8.1.1 CONTACT INFORMATION
For replacement parts and manuals contact:
Sullivan-Palatek, Inc.
1201 West US highway 20
Michigan City, Indiana 46360
Phone: (219) 874-2497
Fax: (219) 872-5043
Toll Free: (800) 438-6203
www.sullivan-palatek.com
8.2 PARTS DRAWINGS
The parts drawings are exploded drawings of the various assemblies and sub-assemblies which make up this
machine. Standard models and more popular options available are covered.
NOTE! In referring to the rear, the front or to either side of the unit, always consider the drawbar end of the unit as
the front. Standing at the rear of the unit facing the drawbar (front) will determine the right and left sides.
8.3 FASTENERS
Both SAE/inch and ISO/metric hardware have been used in the design and assembly of these units. In the
disassembly and reassembly of parts, extreme care must be taken to avoid damaging threads by the use of
wrong fasteners.