Sullair DMD Series, Руководство пользователя и обслуживания

Страница: 11 / 46

Section 2
11
DMD MODULAR REGENERATIVE DRYER
INTRODUCTION
The DMD range of compressed air dryers are
designed to remove moisture from compressed air
by utilising state of the art technology to obtain
dewpoints of -40°F PDP and by appropriate de-rating
-100°F PDP.
DMD dryers have been designed to require minimal
maintenance and can be installed virtually anywhere.
The DMD dryer consists of upper and lower head
assemblies joined together with an aluminium
extrusion containing twin internal chambers. The
upper head assembly contains inlet and outlet
manifolds. The lower head assembly contains two
exhaust valves and a passive shuttle ball valve.
During operation one chamber is on-line (drying)
while the other is regenerating, using the Pressure
Swing Adsorption (PSA) process.
P
RESSURE
S
WING
A
DSORPTION
(PSA)
A small percentage of dried air is taken from the
dryer outlet flow and is used to regenerate the
saturated chamber by expanding the dried air from
line pressure to atmospheric pressure. During this
process, the moisture is physically removed from the
regenerating chamber and vented to atmosphere
through the exhaust.
Group
SULLAIR
MODEL
TYPE
INLET
FLOW
RATE
Inlet-Outlet
Connection*
SULLAIR PART
NUMBER
Modular DMD-3 3 1/2" NPT 02250194-291
Modular DMD-5 5 1/2" NPT 02250194-292
Modular DMD-10 10 1/2" NPT 02250194-293
Modular DMD-15 15 1/2" NPT 02250194-294
Modular DMD-20 20 1/2" NPT 02250194-295
Modular DMD-25 25 1/2" NPT 02250194-296
Modular DMD-30 30 1/2" NPT 02250194-297
Modular DMD-40 40 1 1/2" NPT 02250194-298
Modular DMD-50 50 1 1/2" NPT 02250194-299
Modular DMD-60 60 1 1/2" NPT 02250194-300
Modular DMD-75 75 1 1/2" NPT 02250194-301
Modular DMD-100 100 1 1/2" NPT 02250194-302
Modular DMD-120 120 1 1/2" NPT 02250194-303
Modular DMD-180 180 1 1/2" NPT 02250194-304
Modular DMD-240 240 1 1/2" NPT 02250194-305