Sulky Burel DPX Expert 1500 Скачать руководство пользователя

Страница: 7 / 76

3 -

Ensure that the tubes of the universal drive

shafts are properly guarded, both in the working
position and in the transport position.

4 -

Before connecting or disconnecting a universal

drive shaft, disengage the power take-off, turn off
the engine and re-move the key from the ignition.

5 -

If the primary universal drive shaft is fitted with

a torque limiter or a free wheel, these must be
mounted on the machine power take-off.

6 -

Always ensure that universal drive shafts are

fitted and locked correctly.

7 -

Always ensure that universal drive shaft guards

are immobilized in rotation using the specially pro-
vided chains.

8 -

Before engaging power take-off, ensure that

the speed selected and the direction of rotation of
the power take-off comply with the manufactu-
rer’s instructions.

9 -

Before engaging power take-off, ensure that

no persons or animals are close to the machine.

10 -

Disengage power take-off when the universal

drive shaft angle limits laid down by the manufac-
turer are in danger of being exceeded.

11 -

Caution! When power take-off has been

disengaged, moving parts may continue to rotate
for a few moments. Do not approach until they
have reached a complete standstill.

12 -

On removal from the machine, rest the uni-

versal drive shafts on the specially provided sup-
ports.

13 -

After disconnecting the universal drive shafts

from the power take-off, the protective cap should
be fitted to the power take-off.

14 -

Damaged power take-off and universal drive

shaft guards must be replaced immediately.

LIIC

C C

CIIR

UIIT

1 -

Caution! The hydraulic circuit is pressurized.

2 -

When fitting hydraulic motors or cylinders,

ensure that the circuits are connected correctly in
accordance with the manufacturer’s guidelines.

3 -

Before fitting a hose to the tractor’s hydraulic

circuit, ensure that the tractor-side and machine-
side circuits are not pressurized.

4 -

The user of the machine is strongly recom-

mended to identify the hydraulic couplings bet-
ween the tractor and the machine in order to
avoid wrong connection. Caution! There is a dan-
ger of reversing the functions (for example:
raise/lower).

5 -

Check hydraulic hoses once a year:

. Damage to the outer surface
. Porosity of the outer surface
. Deformation with and without pressure
. State of the fittings and seals
The maximum working life for hoses is 6 years.
When replacing them, ensure that only hoses with
the specifications and grade recommended by the
machine manufacturer are used.

6 -

When a leak is found, all necessary precau-

tions should be taken to avoid accidents.

7 -

Pressurized liquid, particularly hydraulic circuit

oil, may cause serious injury if it comes into
contact with the skin. If the case of injury, consult
a doctor immediately. There is a risk of infection.

8 -

Before any operation on the hydraulic circuit,

lower the machine, release the pressure from the
circuit, turn off the engine and remove the key
from the ignition.

AIIN

1 -

Before commencing any maintenance, servi-

cing or repair work, or before attempting to locate
the source of a breakdown or fault, it is essential
that the power take-off is disengaged, the engine
turned off and the key removed from the ignition.

2 -

Check regularly that nuts and screws are not

loose. Tighten if necessary.

3 -

Before carrying out maintenance work on a

raised machine, prop it up using appropriate
means of support.

4 -

When replacing a working part (fertilizer

spreader blade or seed drill coulter), wear protec-
tive gloves and only use appropriate tools.

5 -

To protect the environment, it is forbidden to

throw away oil, grease or filters of any kind. Give
them to specialist recycling firms.