11
ENGLISH
www.sulion.es
ATC:
916749481 - [email protected] /
SAT :
916749483 - [email protected]
Device technical spectifications
General
Nominal voltage and frequency
220-240V~AC 50/60Hz
Protection category
Clase I
Ingress protection
IP20
Work temperature
-5
↔
40ºC
Maximun ceiling slope on which it can be installed
0º
Weight
2,3Kg
Power consumption in standby mode (W)
<0,5
Service value measurement standard
EN 62879:2020
LED
Wattage
38W
Flux
3800lm
Color temperature
3000 - 6000K
RGB
No
Data measurement
360º Sphere
Nº of ON/OFF cycles
10000
Nº of hours of lifespan
30000h
Dimmable
Yes
Angle
120º
CRI
>80
This product have a light source of energy efficiency class
E
Fan
Speed
6
Power (W)
12
RPM
1140
Airflow (m³/min)
150
Airflow (m³/h)
9000
Max noise level (dB)
45
Service value SV ((m³ / min) / W)
9,37
Maximum air speed (m / sec)
12,73m/s
purpose. Contact local authorities or your provider
for recycling advice. Thank you for recycling at
the collection points provided for this manual.
Note:
The important warnings and instructions
indicated in this manual are not guaranteed
to cover all possible conditions and situations
that may occur. It must be understood that common sense,
precaution, and care are factors that cannot be included in all
products. These factors can and must only be provided by the
user who maintains and enjoys this fan.
Preparing for installation
Note:
The estimated installation time is 120 minutes. This
product can only be installed by a certified electrician Ca-
refully separate the fan’s parts, avoiding the use of cutters
or blades that could scratch any part of it.
Remove the fan from the packaging carefully, avoiding the
use of knives which could scratch any part of it.
Remove all the components. Place the motor on a cloth or
wet surface so as not to damage its surface finish. Carefully
handle the unit to make sure that its casing does not bend
or get scratched.
The fan must be mounted on the floor or a large enough
table to prevent any component from falling off.
