Safety Section
6
Safety decals should be mounted on your equipment
as shown in this safety section. Yearly and prior to
equipment use, check that all decals and shields are
in place and legible.
To order a replacement decal or shield at no charge,
contact your dealer or Sukup Manufacturing Co.,
Box 677, Sheffield, IA USA 50475. If replacement is
necessary, make sure location for decal is free from
grease, oil and dirt. Remove backing from decal and
place in proper position.
Decals 1 and 2 must be mounted during installation.
Decal 3 is mounted at factory. Make sure location for
decal is free from grease, oil, and dirt. Remove
backing from decal and place in proper position.
IMPORTANT: If suggested locations are not clearly
visible, place safety decals in a more suitable area.
Never cover up any existing safety decals.
1. DECAL L0281 – WARNING: To avoid serious
injury or death. Mount this decal on bin sheet
near door handle.
2. DECAL L0258A – DANGER: Do not enter this
bin! Mount this decal on bin sheet near door handle
and at all other entry points. Also mount this decal at
eye level on bin sheet near ladder going to roof.
3. DECAL L0284 – WARNING: Keep away from all
moving parts. Decal is factory-mounted on motor.
