Suiden SS-22DD-8A Скачать руководство пользователя страница 7

6

Optional

Cool air duct extension

The cool air duct extension (Ø 125mm, length 5m) can be used when the unit can not be placed close to the work

-

place where it is needed.

I. 

Make a hole in the duct extension where you want to 

cut it with a flat screwdriver or similar tool.

II. 

Cut the duct extension all the way around using scis

-

sors or a side cutter.

 

Cutting the cool air duct extension

Cut the cool air duct extension according to required length in the following way.

 

Changing the diameter

You can reduce the diameter of the cool air duct by twisting it to 

the left, thereby increasing the air flow velocity.

∆ 

Note: 

Be careful not to make the duct extension too narrow. This 

could cause deterioration of performance and malfunction.

 

Attaching the cool air duct extension to the cool air duct

I. 

Loosen the screws on the duct cap, and then remove the duct cap from the cool air duct.

II. 

Mount the cool air duct extension to the cool air duct, narrow the end until the gap is completely sealed, then 

tighten the duct strap.

III. 

Attach the accessory cool air duct extension cap onto the duct extension with glue.

 

Attaching the cool air duct extension to a cut cool air duct

I. 

Cut the cool air duct.

II. 

Mount the cool air duct extension to the cool air duct, narrow the end until the gap is completely sealed, then 

tighten the duct strap. 

III. 

Attach the accessory cool air duct extension cap onto the duct extension with glue.

 

Fastening the cool air duct extension

Hang the cool air duct extension with wires from the ceiling or fasten it securely to the wall.

∆ 

Note: 

Do not use the swivel function when the duct extension is attached.

 

*

This will damage the swivel device.

Cut off

Twist to 

the left

Optional cool air duct extension

Cool air duct extension

Attachment notch

Cool air duct 

extension cap

Ø130 Duct strap (Optional)

Cool air duct

Duct cap

Cool  air duct

Screw

Cool air duct extension

Attachment notch

Cool air duct 

extension cap

Ø130 Duct strap (Optional)

Cool air duct

Duct cap

Cool  air duct

Screw

Cut off

Cool  air duct

Содержание SS-22DD-8A
















Отзывы: