13
Fix Support arm crank bracket.
Close the door completely, and fix the Support arm L-type
bracket to the door with provided screws.
Fixing Support arm
Open the door slowly and fully and fix the Crank bracket.
Loosen the hexagon socket head cap screws on the Support
arm crank bracket, and allow the bracket to move along the
Channel rail.
Release Support arm crank bracket.
Loosen the screws on the Lower arm which fix the Arm
connecting pipe.
While keeping the door closed with no gap between the door
and side board, retighten the screws.
If there is any gap left, adjust it by referring to "7
Troubleshooting
【
4
】
".
Adjusting the gap between the side board and door.
Support arm
Support arm crank bracket
Channel rail
Hexagon socket head cap screw M6
×12
Cross-recessed bind
self-tapping screw
4.5
×20
Support arm L-type
bracket
Rear face of door
When positioning the door, be sure to loosen the hexagon socket head cap screw on the Support arm crank bracket to allow
the bracket to move along the Channel rail.
Be sure to face the pin of the crank bracket to
the rear of the cabinet.
Arm connecting pipe
Pipe clamp
Lower arm
Hexagon socket
head cap screw
M6X35
Rear face of door
Tightening torque:11-13 N m
