7
Mounting of Door stopper
3
11
Check the lateral and braking
directions of the damper
( - 【1】)
The damper will not work if the
direction is wrong.
Be sure to install the damper after
hanging the door, since it might be
damaged when hanging the door.
Installation of the Damper
12
【1】
Assembly of Damper
【2】
Installation of the Damper
Damper
Pan head screw with
captive washer M5×14
Open
Close
Braking when closing
Braking when opening
【
Optional parts
】
Roller on the
trailing edge
Plain
washer
With the door is opened more than
600 mm, attach the damper in a
position that does not touch the rack.
With the door closed, attach the damper in a
position that does not touch the rack.
Ｒ
Snap retainer
Clutch gear
Washer
Main body
groove
Snap retainer
(Insert onto the groove from the side.)
For right opening
(for R)
Rotating direction
Center part
Shaft
Insert the clutch gear and washer to the shaft
portion of the braking device body.
❶
❷
Damper is non-handed. Right and Left-opening is alternative by the direction of clutch gear. The way to remove the clutch gear is the reverse of the installation procedure.
1
0
2
Color of the center part
view from the front
Right opening
Left opening
White
Blue
White
Blue
Braking when
closing
Braking when
opening
【
Optional parts
】
Assembly or dis-assembly of the damper and the clutch gear
must be done by the specified
manner.
15
中心に向けて取
り付けて下さい
Stopper
plate
心
中
Pan head screw with
captive washer M5×8
矢印方向を扉の
Door stopper
2×
I
4.6 hole
12
14
Door stopper
【
Optional parts
】
Door stopper
(floor mounted)
【
Optional parts
】
When vertical frame is not used, use the
door stopper
【
Optional parts
】
to
prevent the door falling.
When is not usable, use door stopper
(floor)
【
Optional parts
】
.
35
36
36
35
35
ハンガーＡ
矢印方向を扉の
中
心
り付けて下さい
中心に向けて取
Fasten the door stopper firmly
to prevent it from falling.
❶
❶
❷
❷
12
Pan head tapping screw 5×16
13
Do not rotate the clutch gear with too much force or turn it in
the opposite direction of the specified direction. Otherwise, it
may be damaged.
Caution
Caution
Caution
Caution
For left opening
(for L)
Open
Close
Close
Open
Roller on the
leading edge
The procedure describes a right opening setup. The left opening setup is installed in the opposite positions.
