Succeeder SF-8100, Руководство по обслуживанию, Страница: 8 / 48

8
3.2. Movement module
The movement module is a unit that contains mechanism of manipulator, arm with XYZ
direction, probes and other necessary parts.
Communication system
cuvette
Temperature and
status
Sample
loading
Test Clean
release
detach
move
Temp control
heat
cool
Status detection
Sample rack
Open alarm
XYZ move
loading probe
Loading pump
Magnetic bead
Optics
pipeline
Inflow/outflow
pump
3.3. Sensor module
The sensor module can be divided into three parts including test channel, temperature
board and main board
3.3.1. Test channel use mechanical method which could drive the bead inside cuvette during
test cycle;
3.3.2. Temperature board which could provide 37
℃
to incubation area, test area and also
reagent area to incubate samples and reagents;
3.3.3. Main board could detect and measure the bead inside cuvette, and then calculate the
right result by the bead movement.
3.4. Liquid flow module
The sample flow rate is monitored by measuring the micropipette which calibrated flow
restrictor .
Liquid flow module consists of inflow pump, inflow valve, injectors, electronic valves,
probes, pipelines, outflow pump and some other parts. It ensures correct sample
amount of the whole system.