9
29. BOOTH OUTPUT (PHONO)
Stereo output (RCA) for connecting a further
amplifier, e.g. for the monitoring system or PA
application in a secondary room.
30. RECORD OUTPUT
Stereo output (RCA) for connecting a
recording unit.
OPERATION
POWERING UP
To protect your audio equipment, specifically your
speakers, follow this power-up sequence:
1.
Set all output volume controls of any equipment
to the lowest setting.
2.
Switch on your audio sources first, then the
mixer. Always switch on amplifiers last.
3.
Turn up the volume control on your sources (if
available).
4.
Set the output volume of the mixer to a low
level.
5.
Turn up the volume of your amplifier(s) slowly.
6.
Adjust volume settings as required.
For switching off, always switch off amplifiers first,
then the mixer and then the audio sources.
CLEANING & SERVICE
Always disconnect the mains power before
cleaning. Never use solvents or aggressive
detergents to clean the device.
