NoWire Model 2100 Installation and Operation Manual
NoWire Model 2100
Submeter Solutions, Inc., 888-64METER
Page 26
10
Copyright Information
Copyright © 2012-2016 by Submeter Solutions, Inc.
NoWire and Submeter Solutions are trademarks of Submeter Solutions, Inc.
Other brand and product names are trademarks or registered trademarks of their respective holders.
U.S. Government Restricted Rights:
Use, duplication or disclosure by the Government is subject to restrictions set
forth in subparagraph (a) through (d) of the Commercial Computer Restricted Rights clause at FAR 52.227-19 when
applicable, or subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS
252.227-7013, and in similar clauses in the NASA FAR Supplement.
Limited Warranty
SUBMETER SOLUTIONS IS PROVIDING THIS WARRANTY IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES,
INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY IS
BUYER'S EXCLUSIVE REMEDY FOR ALL CLAIMS AGAINST SUBMETER SOLUTIONS. SUBMETER SOLUTIONS SHALL NOT
BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES. SUBMETER SOLUTIONS' TOTAL LIABILITY FOR ALL
CLAIMS SHALL BE LIMITED TO THE PRICE PAID FOR ITS PRODUCT.
Submeter Solutions promises buyer that any standard product manufactured by Submeter Solutions shall be free
from all material defects in design, material, or manufacturing for a period of 1 year from the manufacture date;
provided, however, that the warranty shall not extend to ordinary wear and tear or to normally replaceable
components (e.g., batteries). During the warranty period, Submeter Solutions may repair or replace (in its sole
discretion) any product suffering from a warranty defect and returned freight prepaid by buyer, with no charge to
buyer for any warranty repair or replacement. The warranty shall remain in full force and effect for such 1 year
period, provided that the product: (1) was installed, operated, and maintained properly; (2) has not been abused
or misused; (3) has not been repaired, altered, or modified outside of Submeter Solutions' authorized facilities; (4)
has not been sold subject to other warranty terms specified at the time of sale; and (5) is still owned by the original
purchaser. This warranty provides specific legal rights that may be varied by state law. Submeter Solutions's
products are not designed for life or safety applications.
Product Application Limitation
Submeter Solutions products are not intended for use in critical applications such as nuclear facilities, human
implantable devices or life support. Submeter Solutions is not liable, in whole or in part, for any claims or damages
arising from such uses. Submeter Solutions strongly believes in continuous improvement, therefore we must
reserve the right to change specifications and product offerings without notice. Where possible, we will substitute
products with equivalent functionality when necessary.
NOTICE
•
This product is not intended for life safety applications.
•
Do not install this product in hazardous or classified locations.
•
The installer is responsible for conformance to all applicable codes.
Submeter Solutions, Inc.
45 Logan Ave S
Renton, WA 98057
425-228-6831
888-64METER
SubmeterSolutions.com
December 27, 2016
